NEW Brass Components Make a Easy Earrings

These Cute as a Button earrings have a Juicy Couture flair about them. Easy to make with How to instruction following.

Easy List Of Supplies:

2 – coiled brass wreaths

2 – 6mm faceted glass beads. I like the Firepolish Czech Glass for this project.

1 -pair of gunmetal earwires

2 - 6mm open jumprings

12 inches of gold or brass wire (24 gauge)

1.Cut 6 inches of wire and thread through your glass bead keeping the glass beads centered on the wire.

2.Place the glass bead into the center of the brass coil wreath and secure the bead in place by wrapping the wire around the back of the coil pulling tight so the bead is fastened.

4. Take the wire and wrap around a coil in back several turns. Do this on each side of the bead. Once it feels fastened in place, trim the wire close and roll any stray piece toward the center and tamp down lightly.

4. Add a jump ring to the coil and close.Then attach the earwire to the closed jumpring to finish.

5.Repeat steps for other earring.

Experiment with some fun colors. Opaque spring colors would look great in this design.

This project could easily be made into a pendant for a necklace. At ohiobeads we have these coils in three sizes. You can check them out here.

Popularity: 34% [?]